Frequently Asked Question

How to perform a Level 1 Reset on an eWON?
Last Updated 4 years ago

First Level Reset

To perform a first level reset, press and hold the reset button for approximately 4 seconds after powering up the eWON. The USER LED will flash red at about once a second. When this occurs, release the reset button and wait approximately 30 seconds. The eWON will automatically restart and become ready to communicate.

The following parameters return to default on a 1st level reset:

  • System Parameters (eWON name, User name/password reset to default adm/adm)
  • Gateway parameters (reset to 'unconfigured')

The following remains unchanged:

  • Selected language
  • Internet Configuration
  • Talk2M configuration (including activation key)
  • LAN IP address

Please Wait!

Please wait... it will take a second!