Frequently Asked Questions
Resetting a JetCard 5010G-P
Last Updated 5 years ago
Switch can be reset in the following four ways.
1- Physically pressing the button
2- Web interface
3- CLI through command listed in section 4.1 of user Manual
4- Using JetView Pro
Please note that The switch provides the default configuration file in the system. Also if you have configured the IP on the switches already, reset will not change the IP to default, this is preserved so that switch can reconnect to network after a reset and reboot.Please do not forget to save before a restart. If you have a large number of switches. You can reset them as a group using JetView pro.