Frequently Asked Question

I have reset the switch back to default on the web interface and have lost connection to the unit, how do i restore connection to the unit through the console port?
Last Updated 6 years ago

1- Connect the switch using a console cable
2- Open a CLI session
3- Type in the following commands:
enable
configure terminal
Interface VLAN 1
ip address 192.168.10.1/24
no shutdown
end
configure terminal
interface fa2
switchport access vlan 1
end
4- Now connect the switch using port 2 setup above
5- You can now access the web-interface.

Please Wait!

Please wait... it will take a second!